Skip to main content

Got a Samsung SCH-i760? Don't use an external antenna!

If you have a Samsung smartphone, such as the SCH-i730 or SCH-i760, you may or may not be aware that there is an external antenna jack on the back of this phone (you have to pop off a small round cap to see it).

It is possible to use this jack to plug in an external cell phone antenna - an incredibly convenient option for road warriors who can't afford to drop calls when traveling through spotty areas, etc. However, I have this cautionary tale to share with you.

This is the 3rd time I have had my cell phone replaced because the internal antenna performance degrade to almost nothing. It started with my Samsung SCH-i730, and then when I upgraded to the SCH-i760, it happened twice. I have decided that the issue is likely one of the following:

1. Samsung makes a flaky and weak connector, which breaks the internal antenna connection when used (doesn't really make sense, as the external antenna still works)

2. I have been unlucky enough to get 3 defective phones (yeah, right.)

3. The external antenna is BURNING OUT the internal antenna, due to a design problem with the Samsung phones.

4. The internal antenna is BURNING OUT, due to a design problem with the external antenna.

In circumstance 3 & 4, a little bit of radio theory applies here: When you plug in an external antenna, it doesn't take the internal one out of the circuit. Rather, the 2 antennae are in parallel, and untuned. This creates a high SWR (standing wave ratio) situation that the fragile internal antenna (probably a just a "coil" drawing on a circuit board) can't handle.

If this is the case, Verizon should do a better job of notifying users that this jack is for the testing bench only, and not for use with an external antenna. After all, it's pretty easy to come by an aftermarket adapter that fits this jack, advertised for use with an external antenna. Verizon sales people will not warn you against using this jack with an external antenna.

It could be a problem specific to my external antenna, but when searching I found 2 posts indicating others have had this problem:

Post #1
Post #2

Finally, I just found a blog post with a definitive link to a faq on Samsung's website about this. The jack is not for use with an external antenna!

Comments

LafinJack said…
I had a similar problem with my first i760. I had an external antenna adapter for my Verizon PC card, and switched over my regular internetting to the i760. I would plug the old adapter into back of the phone when I got home for the night, then remove it when I left the next morning. It was snug, but I figured it was an industry standard jack.

Then about a month ago the little nubbin down in that cavity snapped off the circuit board. Oops. Luckily I got the phone replaced through my insurance plan, but I looked into new adapters. Looks like there's one that's specifically for the i760 and works much better. It fits, but it's not nearly as tight as the old one and I doubt I'll have the same problem again.

HTH
HAND
YMMV
Anonymous said…
well antennas are only as strong the signal that is available . A good cell phone enhancer will do the magic
Rebecca Maurier said…
I must confess, I'm not a blog fan. but the standard of presentation and especially the quality of your content makes this blog most enjoyable.

Thanks for sharing
Fareham Aerials

Popular posts from this blog

Reaper, Linux, and the Behringer X-Air - Complete Studio Solution, Part 1

Introduction and Rationale This is part one of a major effort to document my experiences with recreating my home studio, entirely using Linux.  Without getting into too many of the specifics, a few months ago I decided that I was unhappy with Windows' shenanigans - to the point that I was ready to make a serious attempt to leave it behind.  For most in this situation, the obvious choice is to switch to Mac OS.  With its proven track record, support, and options for multimedia production, it is naturally the first alternative to consider if your goal is to simply use something other than Windows. For me the choice was not so simple. I despise Mac OS and, in general, the goals and philosophies put forth by Apple in an effort to ostensibly provide users with an "easy" working environment.  It does not help that I have also failed to find any aspect of the Mac OS UI intuitive, but I realize that this is a subjective matter. With my IT background and user-control* favori

An Alternative Take on AI Doom and Gloom

 I've purposely held my tongue until now on commenting about "AI" (or, more specifically as has come to be known, GAN or Generative Adversarial Networks).  It seems like it is very in-style to complain about how it has made a real mess of things, it is displacing jobs, the product it creates lacks soul, it's going to get smart and kill us all, etc. etc.  But I'm not here to do any of that. Rather I am going to remind everyone of how amazing a phenomenon it is to watch a disruptive technology becoming democratized From the time of its (seeming) introduction to the public at large, around November of 2022, to late 2023, the growth and adoption rate has been nothing short of explosive. It features the fastest adoption rate of any new technology ever, by a broad margin.  To give a reference, the adoption rate for AI image and text generation, real-world uses, in just 12 months is comparable to all of that of the another disruptive technology, the World Wide Web, takin

RANT TIME: Why do replies to a message I sent go to my spam folder?

Despite what one would think/hope, sending a message to a given address does not inherently give Google a high confidence that a reply from this address is expected (and, for example, that it should bypass spam checks). I have confirmed with Google's tech support that there is no way to automatically have this happen. The user can do the following: 1. Add the address to your contacts list in Gmail. 2. Check spam folder for replies, and mark it as "not spam" if something ends up there, which should influence the fate of future replies received. I can also approve an address at the domain level, i.e. if it is a big vendor or similar. I've had to do this with several of our Chinese vendors. I regularly ask engineering and purchasing to give me a list of the supplies we deal with, so I can approve them as a preventative measure. For what it's worth, all of the false positive instances of reply -> spam we have experienced have involved the sender's email server