Got a new car

Well I did it.  Bit the bullet and, after thinking about lots of different possibilities, decided to go with what I know:

2013 VW Golf TDI with tech package.  It took me a while to find one, but as I learned from my last car, if you don't get what you want the first time, you'll spend the rest of your ownership trying to add it (and in many cases you still won't get it).

Here are some of the many features:

• Heated seats (my previous car didn't have this and I regretted it for 12 years.)
• Xenon headlights with "follow" action
• LED DRLs
• 17" rims
• Dual power seats
• Nav, SDcard slot
• Bluetooth smartphone integration
• Sunroof
• DSG transmission (basically a standard transmission that is robotically automated)

It's going to take me a year or two just to get a handle on what is in this car.  I apparently have the RNS315 radio, which is different from the RNS516, but is apparently now standard on the tech package, I'm guessing because it's a little cheaper(?). This is the kind of stuff I am dealing with.

The only mod I've done so far is to rewire the lighter outlets so they are "always hot".  The new VW's have apparently finally gone to the dark side of shutting off the 12V outlets when the key is off.  It was driving me absolutely bonkers because every time I turned the car off my phone would reset, not to mention the fact that the battery wouldn't charge unless I left the ignition on.  I don't understand how the rest of the world can tolerate this.  My guess is that all the car manufacturers have gone to this standard because a few people managed to keep killing their car batteries, or starting fires.  Luckily it was pretty easy to rewire - no cutting wires, soldering, or even removal of any trim.  I am thinking about putting out a kit on eBay in case anyone else wants to do this.  If this sounds good, please let me know so I can gauge the interest level.

I'll be posting in the future with more details, but here are my (really) early impressions:

• It's fast, but laggy (stomping it from stop = almost 3 seconds delay before launching)
• Handling, on the other hand, is amazing - responsive yet very refined
• Car tech has come a long way in the 12 years since I bought a car.
• God help me if I ever have to fix this thing.

And for anyone who has this question on their mind, no I'm not planning to convert it to run on SVO. 

My 2002 Golf is for sale. It is clean, and, of course running the best it ever has.  I will miss it (almost as much as I will miss not having any car debt).  But I will have a LOT more free time. 

Golf comes home on a wrecker, due to timing belt tensioner malfunction

Not even one day after buttoning up the car from the coolant sensor replacement, I got stranded while coming back from town, running some errands.  The car just stalled and wouldn't restart.  At first I thought I might have been out of fuel, (needle was slightly above 'E', not usually a problem).  I coasted into a nearby business parking lot and checked the fuel lines, there was no air.  I opened the timing belt cover and the belt looked fine.  However, I wiggled it and there was a lot of play.  I determined that the tensioner had likely failed and the belt skipped a tooth or so.  Called a wrecker and got a "free" ride home thanks to AAA.

We were leaving for a weekend camping trip that day, so I had no chance to do anything with it. That was a little anxiety-inducing, considering the possibility that my engine may or may not have been destroyed. When I got back I finally got it apart and reset the timing.  Sure enough, the tensioner was basically not attached anymore.  The nut had come loose and all but fallen off.  I definitely remember that I tightened it "pretty hard" before (there is not enough room to get a torque wrench in there).  This time I put thread-lock compound on it, so hopefully it will be good to go.

I got the timing all set up using my tool set.  As a neat trick (though somewhat unnecessary) I set up my laptop with a USB webcam so I could monitor the TDC mark on the flywheel, while I rotated the crankshaft from below.

The timing belt was still in really good shape.  No sign of shredding at all, in fact it still had the writing visible.  Seems like the 100,000 mile belt I bought was a good choice. I replaced the "ribbed" (accessory drive) belt as that was cracking.  Pulled out the locks and breathed a sigh of relief as I successfully rotated the engine through by hand.  Got it all back together, with the whole job coming in at about 5-6 hours, taking my time.  I have realized that if I try to go any faster than that, I end up doing the job twice.

If I had the dealership or someone else do it, it would have probably cost $500-$700, and that would have been after withstanding tons of grumbling and groaning about the veg kit, other mods done to the car, the age of the car, etc. etc. 

Really feeling like I haven't got time for this crap now.  Here's to finding a new car soon.

Emergency repair after brake caliper cease

Happened a little while ago now, but I didn't get a chance to write about it.  The driver's side brake caliper had been dragging for quite some time.  After a trip the wheel would be extremely hot.  I'd been planning to deal with it some weekend, but when I noticed some brake fade, I had to do something.  I ordered a new hub on a hunch, and it turned out to be a good call.

Driver side rear end torn all the way down after the components were damaged from high heat.

The caliper pins had frozen up causing the brake to be stuck on.  The pads were worn down to nothing.  The heat caused the tone ring (associated with the ABS sensor) to warp.  Since the tone ring is integrated with the hub, I had to replace the entire hub assembly.  

While I was in there I also replaced the splash shield (shockingly, the dealership had this item in stock!  The first time ever). So the whole process went like this:

• Remove wheel
• Remove brake caliper
• Remove rotor
• Remove hub nut (after locating my old VW hub nut socket!)
• Pull hub assembly (used jaw pullers)
• Unbolt stub axle
• Get the &*@#$!ing bearing race off without damaging the stub axle (I used air chisel.  It was fast but delicate work.)
• Replace splash shield
• Reinstall stub axle
• Install new hub
• Install new hub nut
• Reinstall rotor (it was only a little warped, acceptable).
• Repair and grease caliper pins
• Reinstall caliper
• Install new brake pads
• Install wheel

I did this all in under 2 hours, as I needed to get my car back on the road in a hurry so I could return the trailer I had borrowed.  Then I finished building a deck. 

On a philosophical note.

I've spent a lot more time this summer working on my house instead of the car.  The work wasn't really that hard (I didn't have to figure out how to drill out a single rusty bolt), and now we have a beautiful kitchen and a new deck.  I have a great feeling of accomplishment and something that I can share with our friends and family.  Really got me thinking. If I put half the amount of labor I put into my car into my house, I would end up with something that is actually worth money in the end.  Meanwhile, my car just sucks money and time and, if I'm lucky (and determined enough), I am left with a car that will get me around.  I looked at my car log, and the amount of money I've been putting into it for parts alone would pretty much justify the payments on a $20K auto loan.  Add to that the fact that I'm really getting tired of dropping everything so I can lose an entire morning, afternoon, day, or days working on my 12-year-old car.  Even though I love my car, I think the time has come for me to trade up to something that I can "just drive".  When I got my Golf TDI, they were very difficult to come by, but the new ones are pretty easy to find and absolutely drool-worthy.  I've also considered getting a Prius, as they are loaded with tech opportunity.  They get similar mileage, but they run on gas which is cheaper than diesel (at least it has been for about 10 years).  I wouldn't have the option of running on vegetable oil, but it's been quite a while since I've done that, and I probably won't have time to do it again.

Anyway, just something I'm considering.  I'm not in a hurry to do anything yet, and as it happens it looks like the crop of cars I found interesting on Craigslist has sort of dried up.  Meanwhile. my inspection is due and I have a coolant temp sensor to replace.  So for now, tune into the next episode!

Euro Projector Headlights and Kamei Grill for the Golf

Woohoo!  I got something done on my car.  Had to go in yesterday and tighten up the connection between the counterweight and transmission gear selector (it came loose, probably was not torqued well enough when I replaced the transmission).  I decided, while I have the battery out, might as well take off the bumper and replace the headlights and grill.  This job ended up being a lot easier than I thought, because I had left the wiring there for my old custom fog lights.  Headlights are halogen projector type with OEM-style marker lights AND LED angel eyes.  I wired the angel eyes to a switch under my dash so I can turn them on/off, depending on how fancy I want to be.

I can't wait to be able to see where I am going at night.  My old headlight lenses were so scratched up that the beam was diffused.

Asus Vivobook X202E DH31T: Quick review

I mostly love my Asus Vivobook X202E DH31t.  It's almost an ultrabook, for a netbook price.  There are just a few things that bother me about it.  Perhaps I can fix some of them...

1&1.com Fail

Today we have a consumer alert for 1&1.com - domain registrar and site host. Lots of people complain about their service, and now I know why.

A domain of mine expired on 11/30/2013. Okay, my bad.

HOLY COW! Within 5 business days, it was cancelled and sent to auction, my 1&1.com account was deleted, and the issue was sent to their collections agency - all without a single attempt to notify me via phone, e-mail, or letter. Called and paid the collections agency plus an extra $12 fee. Collections agency said they would notify 1&1 immediately. Days later, no status update from 1&1. Called billing department, the person who answered had no idea what was going on and said I just have to keep waiting. My site has been down for 13 days now and I have no estimate as to when this is going to get fixed. The first thing I will do if I ever get my domain back is transfer it to Godaddy. Thanks 1&1!

And I used to complain because Godaddy sends out a half-dozen e-mails reminding me about products that are expiring.

Perl script for comparing files: List missing lines, regardless of order

The other day, I was comparing two different sitemap files of the same site. One had more links than the other, and I was trying to get a list of what was missing from the shorter one. However, since they were from different sitemap generators, the order of the links were completely different in each file.

Surprisingly, this turned out to be a much bigger challenge than I thought. I figured I could use some variation of a grep command line, or diff, but I wasn't able to find a simple combination of command line options for either that would do what I was looking for. It seems like everything I found was more geared toward comparing files that were in the same order. Diff simply dumped a large list of all the lines in file2; since the order was different than file1, every line was considered a mismatch.

Knowing this was a fairly trivial operation to do in Perl, I decide to write a quick script to do it. I'm sharing it here in case it can benefit anyone else:

#!/usr/bin/perl

# The purpose of this script is to print the lines in file2 that are not present in file1, regardless of order.

unless ($#ARGV>=1) {die "Usage: different-lines.pl [file1.txt] [file2.txt]";}

open (FILE1,$ARGV[0]) || die "Unable to open $ARGV[0]: $!\n";
open (FILE2,$ARGV[1]) || die "Unable to open $ARGV[1]: $!\n";

# Store the contents of file1 in array
while (<FILE1>) {push (@lines_one,$_);}

close FILE1;

# Iterate through each line of file2, checking for presence in file1, and setting a flag if it's found.
while (<FILE2>) {
        $flag=0;
        foreach $line (@lines_one) {
                $line=~s/\s+$//g;
                s/\s+$//g;

                if ($line =~ /$_/) {$flag=1; last;}
        }
        unless ($flag) {push (@missing_from_1, $_);}
}

close FILE2;

# Dump the results (missing lines)
foreach $line (@missing_from_1) {
        print $line."\n";
}